Pre-Sales

Place your order

Please place your order by filling out the details below.

Page 1 of 5

General information

*
!
Please note that private sales are not open for pre sales.
*
*
*
*
*
*
*
The Seabin V5 Hybrid must be installed in strategic locations where debris accumulates. Refer to the V5 Seabin instruction manual. Our recommendation is one Seabin per debris accumulation point as a minimum.
*
*

Local installation conditions

The conditions at your location can impact the performance and maintenance of Seabin. We kindly ask you to diligently answer the following questions, in order to verify the possibility of installing a Seabin at your port/marina.

*
!
Please note that Seabin V5 hybrid is for floating docks and pontoons only and not suitable for flowing rivers or open waters at this point in time.
!
Please note that Seabin V5 hybrid is for floating docks and pontoons only and not suitable for flowing rivers or open waters at this point in time.
*
!
Please note that Seabin V5 hybrid cannot be installed on a floating dock or pantoon with freeboard out of the mentioned range.
!
Please note that Seabin V5 hybrid cannot be installed on a floating dock or pantoon with freeboard out of the mentioned range.
*
!
Please note that Seabin cannot be installed if water depth is not at least 1,2 meters.
!
Please note that Seabin cannot be installed if water depth is not at least 1,2 meters.
*
!
Please note that Seabins are not suitable to function if current speed is over 4 knots.
!
Please note that Seabins are not suitable to function if current speed is over 4 knots.
*
!
Please note that Seabins cannot be installed at a location where wave height is over 0,3 meters.
!
Please note that Seabins cannot be installed at a location where wave height is over 0,3 meters.
*
*
This will determine the choice of pump. In the United States, common electrical supply is at 60 hertz (meaning the current changes direction or polarity 120 times, or 60 cycles, a second). In Europe, line frequency is 50 hertz, or 50 cycles per second.
Your location does not qualify for the installation of Seabin V5 hybrid. We thank you for your interest, you can leave us a comment and subscribe to our newsletter. We will keep you posted on future developments suitable for your location.

Volume of debris in your location

The Seabins are designed for small to medium volumes of debris and in some cases of high debris volume where extra maintenance is available. Excessive volume of debris is unsuitable for installation of Seabins.

*
!
Seabin’s catch bags can hold up to 20KG of debris per catch. If the amount of floating debris at your location is:
  • Excessive, Seabin cannot be installed.
  • High, we ask you to thoroughly clean the intended Seabin location prior to its installation. We also ask you to plan for regular bag checks – up to several checks per day if necessary.
!
Seabin’s catch bags can hold up to 20KG of debris per catch. If the amount of floating debris at your location is:
  • Excessive, Seabin cannot be installed.
  • High, we ask you to thoroughly clean the intended Seabin location prior to its installation. We also ask you to plan for regular bag checks – up to several checks per day if necessary.
!
Seabin’s catch bags can hold up to 20KG of debris per catch. Please, note that if the amount of floating seagrass, algal bloom or seaweed at your location is large, we ask you to clean the intended Seabin location prior to its installation. We also ask you to plan for very regular bag checks – up to several checks per day if necessary.
!
Seabin’s catch bags can hold up to 20KG of debris per catch. Please, note that if the amount of floating seagrass, algal bloom or seaweed at your location is large, we ask you to clean the intended Seabin location prior to its installation. We also ask you to plan for very regular bag checks – up to several checks per day if necessary.
*
!
Please note that Seabin must be cleaned regularly to ensure proper functioning.
!
Please note that Seabin must be cleaned regularly to ensure proper functioning.
Your location does not qualify for the installation of a Seabin V5 hybrid. We thank you for your interest, you can leave us a comment and subscribe to our newsletter. We will keep you posted on future developments suitable for your location.

General weather conditions at your location

The conditions at your location can impact the performance and maintenance of Seabin. We kindly ask you to diligently answer the following questions, in order to verify the possibility of installing a Seabin at your port/marina.

Tidal range:
 
*
!
In silty water, Seabin’s catchbag may clog. Please note that under such particular water conditions, cleaning frequency needs to increase as needed.
!
In silty water, Seabin’s catchbag may clog. Please note that under such particular water conditions, cleaning frequency needs to increase as needed.
*
!
Please note that Seabins are not designed to function in frozen water. Seabins must be removed from the water during freeze episodes.
!
Please note that Seabins are not designed to function in frozen water. Seabins must be removed from the water during freeze episodes.
*
!
Seabins are not treated with anti-fouling chemicals. Under standard conditions, cleaning must occur once per month. Please note that if the volume of biomass at your location is high, cleaning frequency needs to increase, up to once per week if necessary.
!
Seabins are not treated with anti-fouling chemicals. Under standard conditions, cleaning must occur once per month. Please note that if the volume of biomass at your location is high, cleaning frequency needs to increase, up to once per week if necessary.

Final agreements


If you have any difficulty filling out our questionnaire, please contact us at: support@seabinproject.com